SEGA Genesis TBP - Clear

Please read entire description before purchasing.

Up for sale is a Fully Refurbished Model 1 SEGA Genesis with the Triple Bypass V2 mod kit installed in a aftermarket clear shell.

Console Only!!! No games, controllers, memory cards, PSU, etc.. come with this console. 

 Features:

• New Aftermarket Clear Shell from RetroGameRestore
• Fully serviced motherboard
• TripleBypass V2 Installed
• Headphone output has been retained
• Custom 3D printed backplate (cleans up the looks of the back of the console and blocks original ports that will not be used.
• Brand new 9 pin mini-din installed and will require SEGA Genesis Model 2 RGB or HDRetrovision Cables. 
• Red Power LED

 This console has received my "Full Service" so....

• Motherboard has been ran through a ultrasonic cleaner
  
• Replaced all capacitors and voltage regulators with new ones from Console5.com
• Proper through-hole caps replaced on the motherboard
• Both original 7805 regs have been replaced with the upgraded 78S05 2A versions
• Resoldered all high stress mechanical connections (controller ports, memory card slots, power/AV jacks, etc...)
• Treated all ports with DeoxIt
• 1 year warranty on console

Disclaimer: PLEASE VIEW PICS. I do my best to provide plenty of good quality pictures so you can make your own determination as the the condition of this console. These shells are of a acrylic material and can scratch easily.

With the TBP installed you will not have composite video:

"The Triple Bypass outputs sync on the composite video (cvbs) pin of the multi-out, but not actual composite video.  That means unless you use some alternate installation methods (and risk adding interference back into the signal), you can’t use composite video cables, but you can use anything that syncs on composite video.

That means sync-on-composite RGB cables will work fine, including the HD Retrovision cables!  Also, the “composite video” pin will always output 75 ohm cync, meaning as long as you use properly built cables, you never have to worry about sync voltages!"

***Buyer beware... I do not offer returns, exchanges or refunds for my custom consoles. If for some reason you have an issue after receiving this console please contact me and I will help you resolve it.